Dear Ladies and Gentlemen,
International Conference, Exhibition and Technology Shows “Trenchless Engineering” is Poland’s biggest trenchless industry meeting. Last year we proposed an entirely new formula of the event – and as it has been welcomed very warmly, we decided to follow that path also this year. The 17th edition of this event was held in Tomaszowice near Kraków on 11-14 June.
This year’s edition started with the workshops. This time, at the explicit participants’ request, they were organized in an ‘ABC’ formula that will allow us to present the most important and popular trenchless technologies from scratch. Two main days of the conference consisted of lectures (first half of the day) and technology shows (second half). The event’s crowning finale was the TYTAN prizes awarding ceremony on June 13.
Apart from the theoretical and practical part of the conference, we invited participants to take part in the less formal activities, like a trip to Kraków or a feast. The event was accompanied by numerous attractions prepared in collaboration with the sponsors and partners.
Paweł Kośmider, Chairman of the Conference
11:00 | Registration of participants | |
12:00 – 13:00 | Lunch | |
13:00 – 18:00 | WORKSHOPS – ABC OF TRENCHLESS TECHNOLOGIES | |
Leaders:
Topics: The aim of the workshops is to provide basic information and introduction into the wide field of trenchless construction and technical rehabilitation of pipelines. Participation in the workshop is to give the audience the ability to distinguish particular technologies, knowledge of the purpose and main conditions for their use, as well as knowledge about the basic limitations and requirements related to the preparation of implementation using these technologies (from the technical side). Part I Technologies of trenchless pipeline construction – classification, justification of use, areas of application, advantages and disadvantages compared to alternative solutions, basic aspects of design. Technology presentation: e.g. HDD, microtunelling, hybrid solutions, hydraulic jacks. Part II Technologies of trenchless technical rehabilitation of pipelines – classification, definitions, justification of application and areas of application, basic aspects of design. Technology presentation: e.g. pipe lining, sliplining, SPR, CIPP, construction chemicals, spot repairs, repairs including robots. | ||
18:15 – 19:15 / 18:15 – 22:00 | Dinner in Tomaszowice / Dinner and cruise on the Vistula Dinner for people who do not participate in the trip and who have it in the package will be served in the restaurant in Tomaszowice |
08:00 | Registration of participants |
9:00 – 11:00 | PLENARY SESSION – SESSION I |
The opening of the Conference and welcoming of guests – Paweł Kośmider, Przewodniczący Konferencji “INŻYNIERIA Bezwykopowa”; Jari Kaukonen, prezes International Society for Trenchless Technology (ISTT), Finnish Society for Trenchless Technology (FiSTT); Piotr Ziętara, Prezes Zarządu MPWIK S.A. w Krakowie It is worthwhile to help – and to be together – Anna Dymna, Fundacja Anny Dymnej „Mimo Wszystko” Corporate Social Responsibility – its role and importance for business – Tomek Łucek, Wydawnictwo INŻYNIERIA sp. z o.o. Corporate Social Responsibility (CSR) from the investor’s point of view – Piotr Ziętara, MPWIK S.A. w Krakowie Corporate Social Responsibility (CSR) from the contractor’s point of view – Marek Borkowski, BLEJKAN S.A. DISCUSSION PANEL: How and in what way can the engineering industry engage in CSR activities? | |
11:00 – 11:30 | Coffee break |
11:30 – 13:45 | SESSION II |
Finnish trenchless market overview – Jari Kaukonen, International Society for Trenchless Technology (ISTT), Finnish Society for Trenchless Technology (FiSTT) The Challenges of Multiple Large Diameter Crossings on TAP Project – Atef Khemiri, DCA-Europe HDD in Urban Environment. Analysis of Drilling Project Carried Out in Copenhagen – Kamil Kasprzak, ROE Horizontal directional drilling: past, present and future – dr Henk M.G. Kruse, Deltares E-Power Pipe technology for trenchless construction of high voltage grids – Wojciech Zatyka, Herrenknecht AG Decanter centrifuge and flocculation station – drilling fluids cleaning in DP and HDD – Jacek Jaworski, Heads sp. z o.o. Discussion panel with the participation of speakers from session II | |
13:45 – 15:00 | Lunch |
15:00 – 18:10 | TECHNOLOGY SHOWS* |
Liner installation in a DN800 steel pipe using inversion drum and steam as a heating energy carrier – part I – BLEJKAN S.A./Insituform/POliner sp. z o.o. Renovation of connections in the cap system using UV IMS technology – Inter Global sp. z o.o. Presentation of the Subsite® Electronics, seria TK RECON™ system – JL Maskiner w Polsce sp. z o.o. Presentation of a new generation of jacking machines – DTA-Technik sp. z o.o. Mini recycling system – organizing the small construction site in the aspect of drilling fluids recycling – Heads sp. z o.o. Technology show of a pipeline renovation using SWP – Taylor sp. z o.o. Vacuum backhoe loader CapBora 3200 – water pipeline network failure simulation – Inter Global sp. z o.o. New solutions in iPEK AGILIOS push cameras – Retel Anna Świdroń Assessment of a pipeline condition after the hat profile installation, using the inspection system Ibos – Inter Global sp. z o.o. Liner installation in a DN800 steel pipe using inversion drum and steam as a heating energy carrier – part II – BLEJKAN S.A./Insituform/POliner sp. z o.o. Presentation of the IBAK’s grinding robot – „ELSE” Technical And Research Service Co., Ltd sp. z o.o. | |
18:10 – 21:30 | ATTRACTIONS |
„STEWART TEST” – drive the quad on a special track and compete against others (in the fixed period of time) – HABA-Beton Johann Bartlechner sp. z o.o. Ride a rally car BMW X5-CC, which in 2012 reached the finish line of the Dakar rally – Herrenknecht AG Ride on the SELF-PROPELLED HOWITZER 2S1 GOŹDZIK – Aquaren sp. z o.o. sp.k. | |
15:00-21:30 | Amiblu Chillout Zone with drinks and snacks as well as live shows broadcasts |
18:30 – 23:30 | Feast |
09:00 – 11:15 | SESSION III |
Criteria for the selection of technology for trenchless construction of gas pipeline sections – experiences of Gaz-System S.A. – Roland Kośka, Gaz-System S.A. Optimization of Drilling Process Based on real HDD Projects – Robert Osikowicz, ROE The experiences of PPI CHROBOK S.A. gained from Direct Pipe pipelines installations – Marcin Firkowski, Jakub Hilarowicz, PPI CHROBOK S.A. Direct Pipe for small diameters. Comparison of Direct Pipe, HDD and microtunneling technologies – Dymitr Petrow-Ganew, Herrenknecht AG HDD – range of applications – Jacek Janicki, ZRB Janicki Discussion panel with the participation of speakers from session III | |
11:15 – 11:40 | Coffee break |
11:40 – 13:50 | SESSION IV |
ISTT has a new structure of working, what does that mean? A global aspect to the markets and activities – Jari Kaukonen, International Society for Trenchless Technology (ISTT), Finnish Society for Trenchless Technology (FiSTT) Comparative tests of manhole shafts renovation methods – Dipl.-Ök. Roland Waniek, Institut fu¨r UnterirdischeInfrastruktur gGmbH (IKT) Optimization of loads having the impact on the pipelines laid in the ground – dr inż. Andrzej Kolonko, Politechnika Wrocławska Construction of the underground structures tests necessary for assessing their technical condition – dr inż. Dariusz Zwierzchowski, Centrum Badań i Certyfikacji sp. z o.o. Diagnostics, assessment of technical condition and monitoring of large-diameter sewage collectors – dr hab. inż. Paweł Popielski, prof. PW, Politechnika Warszawska Discussion panel with the participation of speakers from session IV | |
13:50 | For those who are interested: meeting of the Polish Association of Trenchless Technologies (PSTB) |
13:50 – 15:00 | Lunch |
15:00 – 17:30 | TECHNOLOGY SHOWS* |
Well renoration with the PREDL®-FLEXLINER® system – BLEJKAN S.A./Newflow sp. z o.o. BRAWOLINER 3D liner renovation from DN300 to DN400 – H.S. INSPOL Modern technologies in the inventory of sewage wells using KEPSO’s CLEVERSCAN device – Retel Anna Świdroń Introduction to Optitrac – Utilising the latest Fibre Optic Gyroscope and Magnetic steering tool technology – ROE From planning to implementation – the role of the laboratory in the drilling project – CETCO – Poland CETCO sp. z o.o. S.K.A. | |
20:30 – 02:00 | Ceremonial gala, TYTAN 2019 Awards Ceremony |
09:00 – 12:00 | Technical consultations |
dr inż. Tomasz Abel, Wrocław University of Science and Technology | |
dr inż. Beata Nienartowicz, Wrocław University of Science and Technology | |
dr inż. Bogdan Przybyła, Wrocław University of Science and Technology |
The aim of the workshops is to provide basic information and introduction into the wide field of trenchless construction and technical rehabilitation of pipelines. Participation in the workshop is to give the audience the ability to distinguish particular technologies, knowledge of the purpose and main conditions for their use, as well as knowledge about the basic limitations and requirements related to the preparation of implementation using these technologies (from the technical side).
Part I
Technologies of trenchless pipeline construction – classification, justification of use, areas of application, advantages and disadvantages compared to alternative solutions, basic aspects of design. Technology presentation: e.g. HDD, microtunelling, hybrid solutions, hydraulic jacks.
Part II
Technologies of trenchless technical rehabilitation of pipelines – classification, definitions, justification of application and areas of application, basic aspects of design. Technology presentation: e.g. pipe lining, sliplining, SPR, CIPP, construction chemicals, spot repairs, repairs including robots.
TYTAN are the unique prizes granted by Wydawnictwo INŻYNIERIA sp. z o.o. and the outstanding Jury, invited to participate. Jury consists of academics, industry representatives and editors-in-chief of Wydawnictwo INŻYNIERIA’s magazines. TYTAN prizes are awarded to trenchless industry representatives since 2003. The upcoming award ceremony took place on June 13,